HT12 question
02-06-06, 04:22 PM
#1
Cant be bothered anymore
Thread Starter
Join Date: Aug 2004
Location: Norwich UK
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
HT12 question
I think this has been covered before with no result but i will try any way.
Could anybody tell me or tell me where i can find out how much air my Stock twin turbos comsume at a given pressure per min or hour
Scott
Could anybody tell me or tell me where i can find out how much air my Stock twin turbos comsume at a given pressure per min or hour
Scott
02-06-06, 08:48 PM
#2
Racing Rotary Since 1983
iTrader: (6)
https://www.rx7club.com/3rd-generation-specific-1993-2002-16/compressor-map-gurus-ive-got-stock-twins-map-505850/
scott,
see the above thread. it appears that dale clark found a compressor map... the X line data is missing but can be reasonably estimated by backing in to the numbers...
the rotary needs approx 1.92 cfm to make 1 rwhp. most twins top out around 380 rwhp (give or take a few) so:
380 X 1.92 = 729 cfm / 2 (two turbos solving for one) 364 cfm per turbo or 25 lb/minute.
place 25 at the max spot on the X line and fill in the rest.
howard coleman
scott,
see the above thread. it appears that dale clark found a compressor map... the X line data is missing but can be reasonably estimated by backing in to the numbers...
the rotary needs approx 1.92 cfm to make 1 rwhp. most twins top out around 380 rwhp (give or take a few) so:
380 X 1.92 = 729 cfm / 2 (two turbos solving for one) 364 cfm per turbo or 25 lb/minute.
place 25 at the max spot on the X line and fill in the rest.
howard coleman
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
