3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

How much wheel horsepower can an FD auto hold?

Thread Tools
 
Search this Thread
 
Old 07-14-06, 02:41 PM
  #1  
Boost in..Apex seals out.

Thread Starter
 
adrock3217's Avatar
 
Join Date: Nov 2003
Location: Maryland, 21794
Posts: 1,931
Likes: 0
Received 0 Likes on 0 Posts
How much wheel horsepower can an FD auto hold?

How much rear wheel horsepower can an automatic transmission in a 1993 FD hold?
Old 07-14-06, 05:35 PM
  #2  
Full Member

 
Mybaby's Avatar
 
Join Date: Dec 2003
Location: Great Neck, NY
Posts: 225
Likes: 0
Received 0 Likes on 0 Posts
From the Horses Mouth

Hey Bro, last year spoke with the one and all Steve Kan on the phone and I believe that he said 365-85** Rwhp. I took all of his suggestions to reach that number with my setup (95 Auto original owner) and I push right around that. Now that's with a Sh-t load of Mods.
You wanna get there with your auto you better dig dig and dig in your pockets or you could do a swap for additional 2600.00 and start working HP number from there with your mauel setup.
I say do the swap out or go the $$$$ route which I wound up doing by picking up a few months back a 93 (m) to finally get true meaning from the car.
Old 07-14-06, 06:02 PM
  #3  
rx7 fanatic

 
fastyoungone's Avatar
 
Join Date: May 2005
Location: norman,ok
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
The money part is right. the stock tranny is good for about 300 hp, after that look at upgrading the torque converter and the like for a reliable grab every time. I had mine custom built but it should be good for about 450. close to 3 grand just on that single mod( I also had a shift kit put in, electronics, gears, etc.). but anyway, don't let that discourage you b/c auto or not it still pulls hard all the way to redline. There's also plenty of single turbo auto's out there, including mine that are still fun as **** to drive. Even if you had a manual transmission, most of the syncro's have to be replaced if you do a considerable amount of upgrades and shift it hard.
Old 07-14-06, 11:35 PM
  #4  
Rotary Enthusiast

 
Join Date: Feb 2004
Location: california
Posts: 1,083
Likes: 0
Received 3 Likes on 3 Posts
I would say 325 to 350 hp max. and thats if your trans is in to shape. keep it at 300 hp and put the 4.33 gears in the rear end. its the best mod you can do to the autos.
Jeff
Old 07-14-06, 11:58 PM
  #5  
Goodfalla Engine Complete

iTrader: (28)
 
Monkman33's Avatar
 
Join Date: May 2005
Location: Kennewick, Washington
Posts: 3,237
Received 32 Likes on 25 Posts
Adrock, were you ever on NewTiburon.com?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
IB Cristina
West RX-7 Forum
0
08-20-15 05:46 PM
need RX7
2nd Generation Specific (1986-1992)
11
08-19-15 08:27 AM



Quick Reply: How much wheel horsepower can an FD auto hold?



All times are GMT -5. The time now is 02:03 AM.