So I'm replacing my twins. I couldn't get the metal pipe that attaches to the turbos off so I left it on the car. In the process of all this, I bet the metal piece that connects to the metal pipe above the turbos. My question is how bad is this, and what Can I do to fix it?
Thanks

 

If this is what your talking about I believe that's the oil feed to the turbos which is a problem if its pinched.

 

What would be the most cost effective solution?

 

Probably find a used oil feed line and replace it, or make a small AN line yourself.

The 3rd gen guys will probably know better, I have a 2nd gen and they use the same oil feed line for the stock turbo.

 

Oil feed line, you can probably find one in the FS section.

 

Or simply order a new one from Ray @ Malloy Mazda. Mention you are from the club.

OP, in the future please title your threads accordingly. It helps members with the same issues search.

 

in order to replace that i believe you will have to remove your rats nest and all that good stuff. =D