Like the title says. I am running a lot of fuel going to be making over 500hp I was wonder if I should get one of the aftermarket inline filters.

 

If you are going to go for that much HP, don't skimp and just get an aftermarket inline.

 

I would recomend the rp fuel filter at rx7.com

 

I bought the rp filter from rx7.com I thought that was just a stock filter. I was thinking the aeromotive 100 microfiber filter. Has anyone used this filter before?

 

are these filters drop ins, or do they need modified?...sorry to jack your thread a little, but I'm in the same boat as you. Thanks

 

http://www.jegs.com/webapp/wcs/store...50079_-1_10293. These are the filters I am talking about

 

I'm running the stock filter with stock lines (from the tank to the engine bay) on my setup with no problems. I've made a couple of 4th gear 19 psi pulls and everything held up fine.....I don't have plans to change to a different filter. I've relocated my stock filter to the rear subframe, so changes take about 5 mins.....I plan to swap it out every 10-12k miles.