3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

How to get out the rear seats?

Thread Tools
 
Search this Thread
 
Old Mar 24, 2010 | 08:29 AM
  #1  
unreal-icarus's Avatar
Thread Starter
Black Dynamite
Tenured Member: 15 Years
Liked
iTrader: (1)
 
Joined: Mar 2008
Posts: 606
Likes: 3
From: Germany
How to get out the rear seats?

Hi,

i would like to know how to get out the rear seats. i know there are clips on each side and I already released them, but the seats are still being hold by something in the middle. any hints?

thanks in advance
Reply
Old Mar 24, 2010 | 11:44 AM
  #2  
unreal-icarus's Avatar
Thread Starter
Black Dynamite
Tenured Member: 15 Years
Liked
iTrader: (1)
 
Joined: Mar 2008
Posts: 606
Likes: 3
From: Germany
problem solved. this helped:
..removing the rear seats is pretty easy. It was the first job i did on the FD. Your looking to remove the rear side panels, unclipping them from the main body of the car. You need to remove the door kick plates (either pastic or metal) first, unclip the clips hiden by the back support of the rear seat (fold it down and you'll see them) and it'll come away with a little bit of force.The top section (back support), is bolted in place. Fold the top section down and undo the bolts and removing that section. The bottom part of the rear seats is clipped in, im sure you push the bottom section towards the rear of the car and it should come loose....it needs a bit of a shove. Its metal clips so they wont break.......thats about it i think!

mine were sticking in the back a bit too, thatswhy i could'nt pull them out without removing the backrest before.
Reply




All times are GMT -5. The time now is 08:46 AM.