how do you PROPERLY lean out w/o power fc?
Thread Starter
no more problems, PLEASE!
Joined: Jan 2003
Posts: 464
Likes: 0
From: Bay Area, CA
how do you PROPERLY lean out w/o power fc?
is there any way to safely and properly lean out your fuel mixture w/o having a programmable ecu (on a stock ecu)?
i figure you could bolt on a flow mod but that's not what i would consider safe and proper.
i figure you could bolt on a flow mod but that's not what i would consider safe and proper.
Rotary Enthusiast
Joined: Feb 2001
Posts: 1,025
Likes: 4
From: Huntington Beach, CA, USA
If you want to lean out a stock car to get more power (they do run pig rich stock) you could use a S-AFC. Basically a piggyback fuel controller. I think there are other piggyback boxes that do the same thing.
Rotary Enthusiast
Joined: Dec 2001
Posts: 1,252
Likes: 0
From: Sunnyvale, CA
use open intake, put in downpipe, midpipe, and high flow cat back.
put in efini y-pipe. use homedepot boost controller to prevent boost reaching more than 11psi.
now that should bring the AF from 10 to around 11
Reza
put in efini y-pipe. use homedepot boost controller to prevent boost reaching more than 11psi.
now that should bring the AF from 10 to around 11
Reza
Passenger
Posts: n/a
Originally posted by reza
use open intake, put in downpipe, midpipe, and high flow cat back.
put in efini y-pipe. use homedepot boost controller to prevent boost reaching more than 11psi.
now that should bring the AF from 10 to around 11
Reza
use open intake, put in downpipe, midpipe, and high flow cat back.
put in efini y-pipe. use homedepot boost controller to prevent boost reaching more than 11psi.
now that should bring the AF from 10 to around 11
Reza
Thread Starter
no more problems, PLEASE!
Joined: Jan 2003
Posts: 464
Likes: 0
From: Bay Area, CA
Originally posted by TopSecretUSA
and enjoy it while you can because you will probably pop your motor.
and enjoy it while you can because you will probably pop your motor.
Banned. I got OWNED!!!
Joined: Feb 2001
Posts: 2,158
Likes: 2
From: Bay Area, CA
Originally posted by chiminoid
actually, most of the people on this board will tell you that you can throw on all the bolt-ons you want as long as you keep stock boost
actually, most of the people on this board will tell you that you can throw on all the bolt-ons you want as long as you keep stock boost
Thread
Thread Starter
Forum
Replies
Last Post
