i will be getttin the BLACK FACED APEXI BOOST GAUGE, the wite one didnt look stoc enough for me. but when it comes in i want to install it myself but just want the know how

 

It's simple, look on the passenger side of the intake manifold, you'll see a nipple in the center that isn't being used, connect your vaccum hose to that...

Here's a link for installing the guage and pods...http://www.rx7turboturbo.com/robrobi...ge_install.htm

 

I found the easiest way was to affix a hangar onto the vacuum line, and run it through the rubber boot on the steering column. You wont have to drill any holes through the firewall and you can just zip tie any slack you have so it looks clean

 

There is a small hole in the firewall you can run the hose through....just get a flash light on one side and look for a little light shining through....

 

look underneath where you have the cruise control motor or by the ignitor
theres a grommet with a huge hole there going into the car that you can run all sorts of crap though.....