3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

How to Diagnose that the 2nd Turbo is working!!

Thread Tools
 
Search this Thread
 
Old Apr 29, 2005 | 05:22 PM
  #1  
Jed_only_red_RX7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 122
Likes: 2
From: Jeddah, Saudi Arabia
Question How to Diagnose that the 2nd Turbo is working!!

After my recent rebuilt on my stock 93 FD, diffenetly i started to face some minor problems which is getting fixed slowly.

Lately after i started to have a hasitation on the rpm when accelerating and again i was abel to fix it and no more problem with the RPM.

Now the turbo are spooling and the car seemes to be prety good in power, but from 5k RPM to 7k RPM i feel its the same power (no dicrease or increase in power)
so i just wanted to make sure that the 2nd turbo are working or its normal or if there is a way to diagnose the 2nd turbo if its working or not!!!!
Reply
Old Apr 29, 2005 | 05:48 PM
  #2  
alberto_mg's Avatar
Rotary Freak
 
Joined: Aug 2002
Posts: 2,690
Likes: 0
From: nyc+li, ny
start off by installing a boost gauge. then go to the sticky with the FAQs and look for the link for turbo diagnosis/troubleshooting.

good luck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM




All times are GMT -5. The time now is 09:31 AM.