Hose going into stock throttle elbow
12-12-11, 05:36 PM
#1
Hose going into stock throttle elbow
I want to swap my stock throttle body elbow for the Greddy one...but there is a hose going into the stock one and no port on the Greddy piece. What does this hose do and what do you do with it?
12-12-11, 06:38 PM
#2
AWS= Accelerated Warm Startup.
Most people block it off since its believed to wear down an engine faster with it in place.
You can fabricate your own block-off plates or buy them prefab. Banzai-Racing sells them, ebay sells them too.
I believe the Jspec UIM don't have AWS so thats another option.
I did this a few months ago, the blockoff that is.
Most people block it off since its believed to wear down an engine faster with it in place.
You can fabricate your own block-off plates or buy them prefab. Banzai-Racing sells them, ebay sells them too.
I believe the Jspec UIM don't have AWS so thats another option.
I did this a few months ago, the blockoff that is.
12-12-11, 06:49 PM
#3
AWS= Accelerated Warm Startup.
Most people block it off since its believed to wear down an engine faster with it in place.
You can fabricate your own block-off plates or buy them prefab. Banzai-Racing sells them, ebay sells them too.
I believe the Jspec UIM don't have AWS so thats another option.
I did this a few months ago, the blockoff that is.
Most people block it off since its believed to wear down an engine faster with it in place.
You can fabricate your own block-off plates or buy them prefab. Banzai-Racing sells them, ebay sells them too.
I believe the Jspec UIM don't have AWS so thats another option.
I did this a few months ago, the blockoff that is.
12-12-11, 11:33 PM
#4
Rotary Enthusiast
iTrader: (34)
Join Date: Apr 2009
Location: japan
Posts: 771
Likes: 0
Received 0 Likes
on
0 Posts
Do yourself a favor and don't buy ebay plates. The one's I have seen are craptastic, cheaply made and you could probably bend them with your fingers.
I bought the banzai kit even though I didn't need all of the plates (JDM LIM and UIM) and let me tell you those are some well made sturdy as hell block off plates.
I bought the banzai kit even though I didn't need all of the plates (JDM LIM and UIM) and let me tell you those are some well made sturdy as hell block off plates.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
