Heres how I fixed my ignition problem..NOW car wont turn over
Thread Starter
Registered User
iTrader: (61)
Joined: Apr 2004
Posts: 7,334
Likes: 8
From: Los Angeles, CA
Heres how I fixed my ignition problem..NOW car wont turn over
Ok if anyone read my previous thread I had a serious ignition problem. When I would go to turn the key off I could take out the key and everything was still running. So what I did was I took off the rusted end that connects to the negative battery, than cut the wire and put on a new terminal head. Now the ignition works great, but car will not start at all. When I turn it to acc theirs a loud click, then when I go to turn it on nothing, but after I turn key and let go their are two kind of quite clicks. I tried jumping it from my corvette but that did not work, and I also re-charged the battery earlier in the day. I am completly clueless and I need this on the road ASAP, as its my daily driver. If anyone could help, it would be so greatly appreciated, I dunno if its the starter though as it clicks on acc and has those 2 quite clicks when it tries to turn over? Im not sure, thats assuming thats where the clicks are coming from.
Maybe a bad ignition switch or loose wires on it. Also check al the fuses.
It is some type of electrical/mechanical problem. Break it down into related parts and start checking. You-all need to learn how to trouble shoot systems.
It is some type of electrical/mechanical problem. Break it down into related parts and start checking. You-all need to learn how to trouble shoot systems.
Last edited by cewrx7r1; Aug 25, 2005 at 10:55 PM.
Originally Posted by purerx7
When I would go to turn the key off I could take out the key and everything was still running.
Sounds like your car got confused for a sec and thought it had a turbo timer
Thread Starter
Registered User
iTrader: (61)
Joined: Apr 2004
Posts: 7,334
Likes: 8
From: Los Angeles, CA
i fixed the problem with the key, before i would put it on acc than turn it off and take the key out, and all the lights from the acc position were still on. THan i put that new cap on the negative lead, and when I put it on acc and turn it off, it works and everything turns off. But now the car WONT turn over at all, theirs a loud click when I turn to acc, than when i try to start it, let it go their are 2 very small faint clicks?
Your problem is obviously with the ignition switch and not the battery terminals. The fact that futzing with the terminals did anything is pure coincidence.
I'd drop the column and replace the switch.
I'd drop the column and replace the switch.
Thread Starter
Registered User
iTrader: (61)
Joined: Apr 2004
Posts: 7,334
Likes: 8
From: Los Angeles, CA
where am i going to find an ignition switch ASAP? It had to have something to do with the negative part, as the cap was completly corrocded, and was giving me problems, than all of a sudden, it works?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM




