HELP (wiring harness)
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Earth
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
HELP (wiring harness)
Putting the 7 back together after a year of down time. But now I need some help with the FD wiring harness. I was wondering if there is anywhere I could go to find detailed pictures or if someone has pictures that they could post of the harness connected to all the connection points on the right side of the engine(driver's side) minus the A/C stuff.
Thanks.
Thanks.
#2
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Earth
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
The reason I am asking is because we tried to start the car last week and it would not start, all the lights came on and all my gauges came on but the starter was not working properly. I took the starter to get checked out and they told me that the starter solnoid was bad. They put a new one on and I installed the new starter and now nothing comes on. No lights, no gauges, nothing. Then I noticed that the wires for the battery were getting hot so I disconnected the battery and now I am trying to find out what the problem could be. And I don't have any blown fuses. Any advice would be appreciated.
Thanks.
Thanks.
#4
Low boost is 18psi *)
Join Date: Jun 2005
Location: Champaign IL
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
You've got the oil pressure and teh starter signal wire switched. I had the same problem. If you notice, both connectors for the starter signal wire, and the oil pressure sending unit (located like 6-8" above it) have the same black single femal clips.
One thing that sucks is they probably took your money and told you the starter solenoid was bad, playing on your ignorance
Switch the two connectors and it'll fire right up
One thing that sucks is they probably took your money and told you the starter solenoid was bad, playing on your ignorance
Switch the two connectors and it'll fire right up
Thread
Thread Starter
Forum
Replies
Last Post