HELP! vaccum line underneath fuel pulsation dampener..
12-20-05, 08:46 PM
#1
Rotary Enthusiast
Thread Starter
Join Date: Jan 2003
Location: panama city beach
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
HELP! vaccum line underneath fuel pulsation dampener..
There is a line coming up from directly underneath the fpd, i believe coming from an oil injector. I urgently need to find whre it connects. PLEASE HELP....
jamie
jamie
12-20-05, 08:52 PM
#3
5yr member, joined 2001
http://www.fd3s.net/vacuum_hose_diagram2.jpg
According to this, it connects to the hard pipes on the rack.
According to this, it connects to the hard pipes on the rack.
12-20-05, 08:54 PM
#4
Banned. I got OWNED!!!
Join Date: Mar 2005
Location: California- SF city of bay
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
I Figure that since you see that , your manifold is off right?? got a picture? it could be one from underneath the fuel presure regulator.. that goes to one of the top sensors... i'm not at home but once i get there ill look into the vac lines and let you know.. a picture would help
12-20-05, 09:46 PM
#6
resU deretsigeR
Join Date: Dec 2004
Location: TN
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
if it comes off an oil injection nozzle....it goes to the rats nest rack. it goes on one of the pipes that runs to the primary turbo inlet (black plastic 90* elbow that has two nipples on it and bolts to the primary compressor housing.
the red hose sounds like the one you are talking about.
the red hose sounds like the one you are talking about.
