Hello. I have been searching for about 5hours now on the net and cant find a good way to wire up the speedo.

im using a stock EU 280km/h speedo and a vipec v88 ECU. i have plugged in the sensor on the tranny to the ECU and have an AUX output to wire to the speedogauge. but i cant find the input wire.

my car is totaly stripped from old wires so i need to get this working. got the tacho working after about an hour but this is realy frustrating.

the wire im looking for is the one one the speedogauge.

 

Robin-

Check in the Vipec/Link section of the site...might get a better response! Good luck!

 

I was thinking of doing that but since what im doing is quite universal and focused on the 3rd gen gauge cluster. out of a couple of wires i just need to know wich one is the tacho signal. but ill try the vipec/link section. now im starting the cleanup of the shop and going home to sleep :P starting early tomorrow to try and get it to work. i think that it will work if i set it up and turn the wheels fast enough but i want to be able to use the sweep function that the ecu have.