Help on this one
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: Middletown, Ohio (Cincinnati area)
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Help on this one
I have searched on doing the non-seq mod for about a week solid. From what it seems like there is a couple different ways on doing this, right? well what I want to do is eliminate the rat's nest completely. So I was going by Rikki's diagram. I got the manifold off, got part of the nest out. Havent started on the TCA yet. But what I was wanting to know is do you block off the CRV or just let it open. Do I have to use resistors in the solenoids, (I dont care about a check engine light). Does anyone have any tips for me? Please anything at this point will help me out alot, thanks.
#3
Full Member
Thread Starter
Join Date: Feb 2002
Location: Middletown, Ohio (Cincinnati area)
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
You say that like it;s a bad thing. I don't know if his diagram will work with a stock ECU. Looks like I will find out in a couple hours.