help my car won't start
#1
Full Member
Thread Starter
Join Date: Mar 2003
Location: Utah
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
help my car won't start
Ok I finally got everything in, but car won't start, jason says its wiring, but I checkek everything and still it will crank but won't start.
I did the auto to 5 speed swap, no selenoids conected, have power fc, car was running when auto tranny was in, with stock ecu, I did go with a manual eng. Harness when I did swap, followed the forum instruction and checked the schematic on mazda manual also for insurance.
Now, the fuel pump is working, there is spark to plugs. But the fans kicks on when the key is just in the on position, even when ecu is unplugged. I'm so I sound vague, but I'm sitting in the car right now and typing this on my phone.
Please some one help me! Ahhhh.
New modes are, to4 turbo, gredy 3 row, sx fpr, stock inj. Powerfc, straight exhaust, pulleys, 5 speed w/ many harness, and alum radiator, profec b(not even hooked up yet., etc.
I did the auto to 5 speed swap, no selenoids conected, have power fc, car was running when auto tranny was in, with stock ecu, I did go with a manual eng. Harness when I did swap, followed the forum instruction and checked the schematic on mazda manual also for insurance.
Now, the fuel pump is working, there is spark to plugs. But the fans kicks on when the key is just in the on position, even when ecu is unplugged. I'm so I sound vague, but I'm sitting in the car right now and typing this on my phone.
Please some one help me! Ahhhh.
New modes are, to4 turbo, gredy 3 row, sx fpr, stock inj. Powerfc, straight exhaust, pulleys, 5 speed w/ many harness, and alum radiator, profec b(not even hooked up yet., etc.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
rx8volks
Canadian Forum
0
08-11-15 10:30 PM