HELP: How to remove passenger outside power mirror?
#1
Lucky number seven
Thread Starter
HELP: How to remove passenger outside power mirror?
My power mirror is a bit loose, so I wanted to check if the screws that secure it to the door have gotten loose or not.
I can't figure out how to get to it. I initially thought to get it from the inside so I took the door trim out, but found that the screw direction is from the outside in. I checked the FSM and it doesn't make sense how I can get to those screws.
Can someone help?
Thanks.
I can't figure out how to get to it. I initially thought to get it from the inside so I took the door trim out, but found that the screw direction is from the outside in. I checked the FSM and it doesn't make sense how I can get to those screws.
Can someone help?
Thanks.
#2
Rotary Enthusiast
iTrader: (1)
Join Date: Feb 2004
Location: UK
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
easy mate,,,the mirror twist around on its base,, (have a good look at the bottom you will understand,,,,like when you see mirrors folded in on cars to avoid damage when parked),,
the screw will be revealed then
the screw will be revealed then
#3
Lucky number seven
Thread Starter
Thanks .... I didn't think to try it because I was worried it would break loose or I would bend the mount.
Screw was loose, mirror is all good now
Screw was loose, mirror is all good now
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM