3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

HELP - Common places to look for an oil leak???

Thread Tools
 
Search this Thread
 
Old Feb 4, 2002 | 01:42 AM
  #1  
Nameless's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Jul 2001
Posts: 1,087
Likes: 0
From: Nashville, TN
HELP - Common places to look for an oil leak???

I'm leaking oil, but it's on the side of the oil filter, and not towards the turbos. Any common places to look, it's pretty messy since it's been a gradual thing, so I cant really tell where it's coming from, it's definitely above the plugs cause I can see some oil on part of the wires. Any help would be appreciated.
Reply
Old Feb 4, 2002 | 01:53 AM
  #2  
alwan16's Avatar
Senior Member
Tenured Member: 25 Years
 
Joined: Feb 2001
Posts: 568
Likes: 0
From: New York, NY
take off you oil filter and there are one or two small o-rings between where the oil filters sits and the block. you have to take off a few screws and a large banjo bolt to get to them though. that's is probably where it is coming from. those rubber o-rings get hard and don't seal.

other common places that i guess are not your problem is the rear main seal and turbos.
Reply
Old Feb 4, 2002 | 11:01 AM
  #3  
legendrx7's Avatar
Rotarded since 1992
Tenured Member 20 Years
iTrader: (12)
 
Joined: Feb 2001
Posts: 348
Likes: 3
From: Little Rock, AR, USA
I have had an oil leak from the oil filler neck. If you follow the oil filler neck down, you will find that it bolts to the lower section with two screws. There is an O ring there between the two pieces. Mine was leaking there and that is right in the area that you are talking about. Hope this might help. Good Luck
Reply
Old Feb 4, 2002 | 11:20 AM
  #4  
Nameless's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Jul 2001
Posts: 1,087
Likes: 0
From: Nashville, TN
Thanks a lot! I'll check it out this week.
Reply
Old Feb 4, 2002 | 11:38 AM
  #5  
kelrx7r1's Avatar
TNC
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 655
Likes: 0
From: nj
Talking might be the problem!

i have has the same problem not that much oil but got to
be a pain
i had a friend check it hes on the forum named turbovr6.
he showed me its the oil sending unit they
go bad on fd from what i heard.just pm him for more
info and prices from dealer.
hope that helps
Reply
Old Feb 4, 2002 | 03:44 PM
  #6  
SleepR1's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 6,131
Likes: 2
From: IN
Yep, yep, you guys hit them all...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
Cameron38
1st Generation Specific (1979-1985)
3
Aug 19, 2015 06:08 PM
sypath
3rd Generation Specific (1993-2002)
2
Aug 16, 2015 12:06 AM




All times are GMT -5. The time now is 07:18 AM.