3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

HELP!!! Boosting problems

Thread Tools
 
Search this Thread
 
Old May 29, 2002 | 08:02 PM
  #1  
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 21
Likes: 0
From: Greenup KY
Unhappy HELP!!! Boosting problems

Hi all...

I just got the car back from the shop today and since then, my day has just turned to **** ... I have major boost leak when the second turbo kick in... and it doesn’t pull past 4000... I checked all my hoses that I could see and it still makes a swooshing sound ... anyone with some ideas please help... needed fast!!!
Reply
Old May 29, 2002 | 10:13 PM
  #2  
artguy's Avatar
WTB** Very Low Miles 94-95
Tenured Member 10 Years
 
Joined: Jul 2001
Posts: 3,298
Likes: 0
From: Tejas
re check everything...get someone to hit the throttle while you listen for the location...
Reply
Old May 29, 2002 | 10:30 PM
  #3  
Toadman's Avatar
Nomad Mod
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 359
Likes: 6
From: The O.C.
3" rubber coupler from crossover pipe?
Hey Jason, Non-seq pwns j00! 3k rpm and "pow! up to redline" in an "oh sh*t" manner. Still got a minor boost leak(air pump sound), but 7-sins has been extremely helpful.

Last edited by Toadman; May 29, 2002 at 10:35 PM.
Reply
Old May 29, 2002 | 10:57 PM
  #4  
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: May 2001
Posts: 21
Likes: 0
From: Greenup KY
Thanks guys for the help I'll have to check everthing in the morning, but thanks again
Sheldon
Reply
Old May 29, 2002 | 11:44 PM
  #5  
Newbie
 
Joined: May 2002
Posts: 1
Likes: 0
From: Lexington/Greenup Ky
Sheldon!

Go back to the shop and Kick someones ***. RIp their ***** off and burn them.

I will try and help you tomorrow.


ALex
Reply
Old May 29, 2002 | 11:52 PM
  #6  
P'cola FD's Avatar
Hamado things my way!
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 1,245
Likes: 0
From: Pensacola, Florida
If it just happened after the DP install I would look toward the area around the turbos. They might have disconnected the hose to your CRV, or another in that area. Also check that your y-pipe and couplers are tight.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM
gabescanlon
3rd Generation Specific (1993-2002)
7
Sep 5, 2015 12:09 AM
tiger18
3rd Generation Specific (1993-2002)
9
Sep 3, 2015 08:27 PM




All times are GMT -5. The time now is 04:01 AM.