Help ASAP!!! Car is flooooooood!!

Reply Subscribe

Thread Tools

Search this Thread

Apr 12, 2002 | 12:19 PM

serge1

Thread Starter

Rotary Enthusiast

Joined: Jun 2001

Posts: 815

Likes: 0

From: Mont-Laurier , quebec

Help ASAP!!! Car is flooooooood!!

Ok I found the problem. The car is flooooodddddd!!!

Any advice on how to correct this???

I removed the plug and dryed them but the car immediately flood the plug again.

Serge

Apr 12, 2002 | 12:24 PM

Import Convert

Senior Member

Joined: Jan 2002

Posts: 689

Likes: 0

From: Wausau WI

Remove the plugs and the EGI fuse. Crank the engine with the starter for 10 secs or so and repeat a couple times. Replace plugs and fuse. Hopefully it should start.

Apr 12, 2002 | 12:25 PM

Import Convert

Senior Member

Joined: Jan 2002

Posts: 689

Likes: 0

From: Wausau WI

Oh, you may or may not have to hold the gas pedal down. I'm not sure on that one. Lots of people say you do, while some say don't.

Apr 12, 2002 | 12:25 PM

ttpowerd

HARRRRRRRRR

Joined: Jan 2002

Posts: 1,858

Likes: 0

From: Marietta GA

you could also do the atf trick which is the same as above just put a teaspoon of atf in each of the 4 plug holes.

Apr 12, 2002 | 12:26 PM

ttpowerd

HARRRRRRRRR

Joined: Jan 2002

Posts: 1,858

Likes: 0

From: Marietta GA

yes push the gas pedal down while you are turning the engine over

Apr 12, 2002 | 12:27 PM

Johnny

Joined: Feb 2001

Posts: 1,291

Likes: 1

From: Pleasanton,California

Quote:

Originally posted by Import Convert
Remove the plugs and the EGI fuse. Crank the engine with the starter for 10 secs or so and repeat a couple times. Replace plugs and fuse. Hopefully it should start.

yup... exactly the thing to do....

Just like if you would have searched and read the samething serge !