3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Help ! ! !

Old Mar 8, 2002 | 10:01 AM
  #1  
RAZZOR's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Mar 2002
Posts: 47
Likes: 0
From: South Africa
Help ! ! !

Have just bought a 93 R1 with a problem.
As soon as it boosts it starts to break down.
if i switch the ignition off /on it will boost to .5 bar and starts breaking down again.
Have replaced all the vacum hoses but problem still there.
Any ideas ? ? ? ?

Q. where is the check engine light located .
Reply
Old Mar 8, 2002 | 10:04 AM
  #2  
P'cola FD's Avatar
Hamado things my way!
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 1,245
Likes: 0
From: Pensacola, Florida
What do you mean it starts to break down? Does the car shut off, or bog severely? Have you checked your MAP sensor hose?
Reply
Old Mar 8, 2002 | 10:51 AM
  #3  
RAZZOR's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Mar 2002
Posts: 47
Likes: 0
From: South Africa
The car bogs badly just as it starts to boost.
I can drive of boost with no problem ,but as soon as it gets to 0 on the boost gauge it starts spluttering and backfiring.
Reply
Old Mar 8, 2002 | 10:59 AM
  #4  
Bucrx7's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 724
Likes: 0
From: Massachusetts
First thing's first, change your plugs and wires.
Reply
Old Mar 8, 2002 | 11:06 AM
  #5  
Rated R1's Avatar
Oji San
Tenured Member 15 Years
 
Joined: Mar 2001
Posts: 916
Likes: 0
From: Lexington, SC
Originally posted by P'cola FD
What do you mean it starts to break down? Does the car shut off, or bog severely? Have you checked your MAP sensor hose?
I agree. Check this first!
Reply
Old Mar 8, 2002 | 01:59 PM
  #6  
SanJoRX7's Avatar
uid 0
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 858
Likes: 1
From: San Francisco, CA
If you don't know when the fuel filter was last changed, think about doing that, same with the air filter. Do you have a DP or the stock precat? If it's the latter, might be clogged and the backpressure is significant enough to cause bogging.
Reply
Old Mar 8, 2002 | 08:02 PM
  #7  
rynberg's Avatar
Lives on the Forum
Tenured Member: 20 Years
 
Joined: Dec 2001
Posts: 14,716
Likes: 10
From: San Lorenzo, California
you might be in "limp home" mode

reset the ecu: pull the neg batt cable, step on brake for like 30 seconds, reattach batt cable, start car, drive, hopefully it works
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:12 AM.