my passenger window isn't working.. i check the fuse.. i took the door panel out and everything is connected... it was work fine yesterday... but this morning i try to open the window and it didnt work... oh yea the when i push the power window button for the passenger side and the window motor is soundless.. .. could everyone help or know what i should do...

 

You might feel stupid, cuz I did the same thing. But make sure your window isnt locked with the lock control switch on the driver side panel

 

You switch may have dirt in it. Remove it and clean the connections inside the switch itself.

 

I also had this happen! I found out that for some reason, the driver side switch for the passenger side window was having problems. I pulled the switch out of the door panel while still hooked up, and found out that the passenger side switch ground was not working(strange). So I took a small peice of wire and used it to jump the main switch ground(the wire that is away by itself on the switch) to the passenger side switch ground(i cannot remember the color, I will look for you tomorrow). I did this by holding the jumper wire on the two other wires, then operating the window switch(with the ignition on of course) When I did this it worked fine. Then I tried it without the wire and it worked fine still, and that was 3 weeks ago. I dont know why that fixed it, but who knows!!

 

Ok I did this yesterday. We ended up eating dinner on the tables out side (nice evening so no biggie) so I could keep an eye on my car. Then I drove the 140 miles home from the track with the window open. I completely forgot about the lock. When I went to trouble shoot I remembered the switch and it was set to off. I thought that meant the lock was off. It means the window is off. I'm feeling pretty dumb right now.

 

Ha Ha, I did the same thing! It just doesn't make much sense to me that the switch shuts off control to the driver's switch too. We should create a poll to see what percent of us have done this, it seems very common!