heater hose question
#1
Rotary Enthusiast
Thread Starter
Join Date: Jan 2005
Location: orlando/st. petersburg
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
heater hose question
Can you buy the heater hose that is on the turbo side that goes into the firewall to the heatercore at like advance autoparts? I figure I might have to get this from Malloy or something. Mine is definetly split and almost overheated my car, I hit 110 C on the pfc but I know thats not to bad just to hot for me.
thanks guys
thanks guys
#3
Mr. Links
iTrader: (1)
Yes, you can.
However, the stock lines are preformed with the proper curves. If you try to run standard lines in the same stock locations, you will end up kinking some of the bends (I tried it and ended up ordering OEM lines).
If you do some re-routing, you can make the bends less severe or you see if you can find preformed hoses at the auto store which much work as well.
However, the stock lines are preformed with the proper curves. If you try to run standard lines in the same stock locations, you will end up kinking some of the bends (I tried it and ended up ordering OEM lines).
If you do some re-routing, you can make the bends less severe or you see if you can find preformed hoses at the auto store which much work as well.
#4
twinturboteddy ws my idol
Join Date: Feb 2003
Location: Elkton, MD
Posts: 2,347
Likes: 0
Received 0 Likes
on
0 Posts
if you would have ordered the OEM from Ray yesterday, you would have had the hose tomorrow. As Majik said, AAP probably has the right diameter, but you'll have to slinky it.
#5
Rotary Enthusiast
Thread Starter
Join Date: Jan 2005
Location: orlando/st. petersburg
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Thanks fellas im not to worried about the heat right now since its 91 F out right now lol. I shall go today to bandaid it and get the new ones from ray because I need some stuff anyways.
thanks again guys!
thanks again guys!
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM