Headlights
04-01-04, 11:44 AM
#1
Buy my car!
Thread Starter
Join Date: Jun 2003
Location: Raleigh, NC (NCSU)
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Headlights
I traded my east bear headlight for a set of stockers. There are 5 bolts but I can only reach 3 even after removing that black plastic piece. How do I get to the other two?
Also I can't figure out where to plug the lights in. I already plugged them in so that they come up and down but I don't see where I use the plug that my old lights were connected to to make the lights turn on.
Sorry for these noob question but I couldn't find anything about this problem and I've never dealt with the stock lights before.
Also I can't figure out where to plug the lights in. I already plugged them in so that they come up and down but I don't see where I use the plug that my old lights were connected to to make the lights turn on.
Sorry for these noob question but I couldn't find anything about this problem and I've never dealt with the stock lights before.
04-01-04, 02:34 PM
#2
Buy my car!
Thread Starter
Join Date: Jun 2003
Location: Raleigh, NC (NCSU)
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Ok, I figured it out. The place to plug in the connector I couldn't find a place for is on the back of the housing for the light, but it's only accesable when the lights are in open position.
I still only used 3 bolts though, I hope that's enough.
I still only used 3 bolts though, I hope that's enough.
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM