Headlight replacement... HID and such...Need some help!
#1
I Sold My Car 2 the Devil
Thread Starter
Join Date: Oct 2001
Location: Duncanville, Tx
Posts: 2,361
Likes: 0
Received 0 Likes
on
0 Posts
Headlight replacement... HID and such...Need some help!
I need some clues as to where I should start to look for a set of projector and high beam cases along w/ where to find mating bulbs (both HID and Reg) I plan on making my own lazy-eye headlight kit for the Rex (similar to wael-el dasher's). just as an FYI the stock headlight casing is 8" wide so I need two with good enough projection that will still fit within those constraints... Thanks for any help!!!
Ryker
Ryker
#2
Belligerent Security
Join Date: Jul 2003
Location: Pulling you over
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Look at the Hella 90mm HID's or something to those lines. The problem with doing this isn't the width of the lights but actually how deep they go. Some of the HID projectors are very long.
Good luck.
Good luck.
#3
Full Member
Join Date: Sep 2003
Location: South East Massachusetts
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
hid's are now illegal in the us. your best bet is to either import a set or get a set from your local salvage yard
http://www.fet-usa.com/news_reviews.asp
http://www.fet-usa.com/news_reviews.asp
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM