3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Headlight Discrepency

Thread Tools
 
Search this Thread
 
Old Jun 28, 2008 | 10:04 PM
  #1  
vc311's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2006
Posts: 113
Likes: 0
From: LOS ANGELES
Headlight Discrepency

I Recently Converted My Fd's Headlights With Xenon's Hid Bulbs With Balasts And Now My Rx7 Has A Headlight Discrepency .the Headlights Will Pop Down But Not Pop Back Up. The Switch That Makes The Lights Go Up And Down Located On The Top Left Of The Gage Cluster Seems To Work Because If The Headlights R In The Up Position(being That I Have To Pop Them Up Manually By Hand),i Can Press The Button And They Will Pop Down. But If I Press It Again, They Dont Go Back Up.the Light Bulbs Work And I Know I Installed Them Correctly Because There Is Only One Way Of Installing Them. The Thing I Dont Understand Is That I Removed My Hid Kit And Re-installed The Original Factory Headlight Bulbs And I Still Have The Issue. What Could Have Gone Bad?this Happened The Same Day Of The Headlight Conversion. Any Helpful Tips On Troubleshooting Can Help. ...thanks.....
Reply
Old Jun 28, 2008 | 10:18 PM
  #2  
otterball21's Avatar
RIP IceMark
Tenured Member 05 Years
iTrader: (7)
 
Joined: Oct 2007
Posts: 380
Likes: 0
From: Somerville, NJ
something could be catching on the motorized assembly and causing them not to pop up.
Reply
Old Jun 28, 2008 | 10:28 PM
  #3  
silentblu's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (1)
 
Joined: Dec 2004
Posts: 764
Likes: 1
From: california
check the relay located in the front, it most likely needs to be replaced, its the blue one, on the relay box it says retra iirc

theres two of the same kind of relays in there you can pull the other one to test it before you order one
Reply
Old Jun 30, 2008 | 06:04 PM
  #4  
vc311's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Nov 2006
Posts: 113
Likes: 0
From: LOS ANGELES
ok, so i tested the blue retra iirc relay and it is fine.im going to look the wiring diagram to better troubleshoot this matter .thanks for your help..ill keep an update on this issue......
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
Jan 25, 2024 03:34 AM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
Oct 3, 2015 01:08 AM




All times are GMT -5. The time now is 01:37 AM.