3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Hatch-leak very minor need suggestions

Thread Tools
 
Search this Thread
 
Old 11-14-07, 06:30 PM
  #1  
Diamond Cut Seven

Thread Starter
iTrader: (4)
 
The Driver's Avatar
 
Join Date: Apr 2006
Location: with all the rare parts
Posts: 1,446
Likes: 0
Received 1 Like on 1 Post
Hatch-leak very minor need suggestions

I keep getting a minor leak in my hatch right in the right and left side of where the center light ends. It is coming through the weather stripping but the hatch closes fine...

Any idea's?
Old 11-14-07, 06:36 PM
  #2  
sleeper
iTrader: (6)
 
4CN A1R's Avatar
 
Join Date: Oct 2007
Location: Abbottstown, PA
Posts: 1,957
Likes: 0
Received 3 Likes on 3 Posts
new weather stripping

it could be leaking from another spot and running down the hatch, id check above where the leak is comming from also
Old 11-14-07, 06:39 PM
  #3  
Diamond Cut Seven

Thread Starter
iTrader: (4)
 
The Driver's Avatar
 
Join Date: Apr 2006
Location: with all the rare parts
Posts: 1,446
Likes: 0
Received 1 Like on 1 Post
Weatherstripping is original but the car is F'n mint so I know it's not that. I think it's just not line'n up or something...
Old 11-14-07, 06:44 PM
  #4  
All Spooled Up

iTrader: (7)
 
badddrx7's Avatar
 
Join Date: Nov 2001
Location: Ironton,ohio
Posts: 2,752
Likes: 0
Received 3 Likes on 3 Posts
That is near where the rear center tail lamps harness passes thru. Pull the center light out and check that sealing grommet. Pull it out, clean it and run a thin bead of clear silicone sealant around the opening and re-insert.

Also check the push in plastic nuts on each side of the tails where the black plastic covers are located. Under them is the push in nuts. Extract them and you will see a foam gasket that used to seal there. Remove it and run a thin bead of clear silicone sealant around each and re-insert.

Allow to dry and set.

then run a leak test. Close hatch, run steady water hose over hatch for 5 min, stop, raise hatch and inspect. Then report back your observations.


later
Old 11-14-07, 06:52 PM
  #5  
Diamond Cut Seven

Thread Starter
iTrader: (4)
 
The Driver's Avatar
 
Join Date: Apr 2006
Location: with all the rare parts
Posts: 1,446
Likes: 0
Received 1 Like on 1 Post
Thanks man




All times are GMT -5. The time now is 11:12 AM.