3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Has anyone replaced 5th gear themselves

Thread Tools
 
Search this Thread
 
Old Sep 4, 2001 | 07:11 PM
  #1  
victor's Avatar
Thread Starter
Newbie
 
Joined: Sep 2001
Posts: 3
Likes: 0
From: edwards afb CA
Question Has anyone replaced 5th gear themselves

Looking into buy a 93 with a bad 5th gear syncro. I am pretty mechanicly inclined ( I can drop a tranny and have fixed a second gear syncro on an s10 once) Just want to know if I am going to get in way over my head.
Reply
Old Sep 4, 2001 | 09:22 PM
  #2  
turbovr6's Avatar
Senior Member
Tenured Member 20 Years
 
Joined: Feb 2001
Posts: 663
Likes: 7
From: clifton, NJ
I rebuilt my whole trans myself, but i am a mechanic. Honestly though, the RX-7 transmission is very similar to an american RWD trannt. If you could handle that s-10, which I'm assuming was a 700-R4 tranny, then you should be fine.
Reply
Old Sep 5, 2001 | 12:32 PM
  #3  
glemmers's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Jul 2001
Posts: 75
Likes: 0
From: Rockford, IL
I replaced the 5th gear syncro in my car last summer. Really easy. Fifth gear and reverse are in the middle housing and you do not have to disassemble the whole tranny to get to them. While your in there though, check the syncro to gear clearance for all the gears. The 1st gear syncro on my car was close to the low limit. Many people have problems shifting from second down to first, and I believe this may be the problmem. You'll be mad if you don't look at it and then have problems in the near future.

Although I have never worked on an S10 T5, it shouldn't be any harder.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
SakeBomb Garage
Vendor Classifieds
5
Aug 9, 2018 05:54 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 06:33 AM.