Ground problem
01-18-06, 06:50 PM
#1
Full Member
Thread Starter
Join Date: Dec 2004
Location: Mountain View, CA
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Ground problem
Hi guys,
Sorry for the dumb post ahead of time. Anyways after taking the UIM off to replace my turbo control solenoid I have severe bucking and hesitation. The thing is I have one 12 mm bolt left over and I'm almost positive it is a ground. After taking the thing apart many times I still cannot find where it goes. The three grounds I DO have attached are... the one on the coil rack, the clip on the passenger side and the one on the back of the UIM with the 12 mm nut. Please help my forgetfullness!
Thanks,
Rob
Sorry for the dumb post ahead of time. Anyways after taking the UIM off to replace my turbo control solenoid I have severe bucking and hesitation. The thing is I have one 12 mm bolt left over and I'm almost positive it is a ground. After taking the thing apart many times I still cannot find where it goes. The three grounds I DO have attached are... the one on the coil rack, the clip on the passenger side and the one on the back of the UIM with the 12 mm nut. Please help my forgetfullness!
Thanks,
Rob
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM