greddy smic with single?
#1
Full Member
Thread Starter
Join Date: Oct 2003
Location: Orange County
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
greddy smic with single?
Have no idea...can the GReddy SMIC work with a single or only the twins? Looks liek my BNR turbos are **** so I am thinking about single but I already have the GReddy SMIC. Push comes to **** I am sure I will have a bunch of you who would be interested in a GReddy SMIC! =) Lemme know
#4
Mr. Links
iTrader: (1)
It will work (provided you have the piping). How well it will work will most likely depend on the turbo you use. I've seen people stick single turbos on the stock IC, not that it's a good thing.
You'll just need to check your intake temps (which you should be able to do with your PFC).
You'll just need to check your intake temps (which you should be able to do with your PFC).
#5
Full Member
Thread Starter
Join Date: Oct 2003
Location: Orange County
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys...if my bnr's are truly shot I will be most likely running the single on this Greddy SMIC. IT is a bit bigger than stock and was told it will hold around 20 psi on the twins. So I am thinking running 17 or so PSI on the single should work w/o too much trouble...
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
15
09-11-15 12:13 PM