good place to send for a rebuild
10-24-06, 08:48 PM
#1
bwaaa pshhh
Thread Starter
iTrader: (4)
Join Date: Feb 2006
Location: Colorado
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
good place to send for a rebuild
i need to know a good place to get my car rebuilt that people have had theirs rebuilt at
Want to know
how much?
where at?
how long it took?
how well it is running for you or how long it ran?
thank guys all info would be greatly appreciated
Want to know
how much?
where at?
how long it took?
how well it is running for you or how long it ran?
thank guys all info would be greatly appreciated
10-24-06, 09:06 PM
#2
Will work for horsepower
I think the people with the answers you want are going to ask you what your goals are, what you have done, and rough idea what you can spend? There bad about wanting back ground info. Thought i would get you to think and post response for better results. Good luck!
10-24-06, 09:12 PM
#3
Pettit Racing (www.pettitracing.com). Cost, about $4,500 with new rotor housings and with a street port. Time, less than 60 days. Work = top notch.
10-24-06, 10:47 PM
#4
Original Gangster/Rotary!
iTrader: (213)
You're fortunate in that you're close to www.GothamRacing.com and www.rx7.com, two of the best in the country. They're both located in the dallas/fort worth area.
10-25-06, 12:06 AM
#5
I agree with www.rx7.com and www.gothamracing.com but wanted to add www.bdcmotorsports.com also in TX. If you are looking to save some cash brian is usually cheaper.
But if you are going to need 2 new housings, porting plus the regular parts they will all be pretty close in price.
But if you are going to need 2 new housings, porting plus the regular parts they will all be pretty close in price.