Going single turbo
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Oct 2008
Location: Tallahassee, FL
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Going single turbo
Im doing a rebuild, and going single turbo. What all can I remove from my twin turbo setup to sell that i wont need, and what all can i remove from the engine bay that i wont need to put back on the block? Some of the parts i have I know I can remove are the fighters garage intake, m2 downpipe, pettit coolcharge intercooler, if yall can think of any other parts i would greatly appreciate it. I also plan on removing the airpump, but thats all i know i can remove off the top of my head. Also if anyones interested in some parts let me know.
#2
Original Gangster/Rotary!
iTrader: (213)
Before starting another thread, please spend time searching in the single turbo section and single turbo archives in order to educate yourself. Many people have went the single turbo route in the last ~10 years, so you're not reinventing the wheel here
If after doing all of this you have any specific questions feel free to start a thread in the single turbo section or PM me, I'll he happy to help you after you first help yourself
Also, this isn't the FS section---- this is the 3rd gen (not single turbo) tech section
If after doing all of this you have any specific questions feel free to start a thread in the single turbo section or PM me, I'll he happy to help you after you first help yourself
Also, this isn't the FS section---- this is the 3rd gen (not single turbo) tech section
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM
stickmantijuana
Single Turbo RX-7's
0
08-21-15 08:35 PM