1fdrx7

I got my car back together after it had the cage installed and now my stock gauges don't work. The oil pressure and water temperature go all the way up when you turn on the key and the tach don't work also the turn signals don't work the indicator on the dash don't light up and the lights out side don't flash but you can hear the relay clicking. I'm pretty sure I have everything pluged back in and wired up right it's the same as it was before but before all my stock gauges worked. Do you guys have any ideas? Would this be a ground issue or what should I be looking for? Thanks

1fdrx7

Is there something that plugs into the top connector spot?

adam c

iTrader: (2)

sounds like gauges not grounded properly

1fdrx7

I just pulled the dash back out and there is no plug on that side of the car that will fit in the top connector place on the flasher box. The only thing I can find unhooked is the big white connectors that go to the doors that wouldn't have anything to do with the gauges tho would it?I just for ground at the plugs that go into the gauge cluster and almost every plug has a ground I'm not sure which pins should be what tho