Gauge Cluster Help
01-30-12, 08:24 AM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Austin, TX
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
Gauge Cluster Help
so i was trying to modify my stock cluster and like an idiot i messed it up. i only messed up the circuit paper on the back but now none of the gauges work. I need help in getting just the circuit paper.
If anyone has a bad cluster due to bad speedo or tach or whatever as long as the paper circuit on the back is good could you please let me know. i think everything should be ok if i can locate one and since a lot of people seem to have problems and replace their clusters i hope it doesnt take too long.
its a manual 94 rx7 but i dont think there is any difference in 93-95 in terms of the circuit paper.
If anyone has a bad cluster due to bad speedo or tach or whatever as long as the paper circuit on the back is good could you please let me know. i think everything should be ok if i can locate one and since a lot of people seem to have problems and replace their clusters i hope it doesnt take too long.
its a manual 94 rx7 but i dont think there is any difference in 93-95 in terms of the circuit paper.
01-30-12, 08:56 AM
#3
Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Austin, TX
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
sounds good, i sent you a pm. im still looking in the meantime so if anyone can send one out right away that would be great especially if you are within 3 hours or so of austin.