3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

G-Force w/ Single turbo set-up- weird ECU behavior

Thread Tools
 
Search this Thread
 
Old 02-25-02, 11:13 PM
  #1  
Senior Member

Thread Starter
iTrader: (1)
 
AJatx's Avatar
 
Join Date: Apr 2001
Posts: 591
Likes: 0
Received 0 Likes on 0 Posts
G-Force w/ Single turbo set-up- weird ECU behavior

G-Force w/ Single turbo set-up
Have any of you installed the G-Force with a single turbo set-up?

I'm re-wiring my set-up with the G-Force ECU until I get my E6K (my current E6K is in the FC, daily driver).

The car starts and idles fine.
However, I get no tach, no speedo, no mileage (it's fine when the car is in ACC mode), and the coolant and oil pressure gauges are off.

I was told that you need to "boot strap" the stock ECU by tricking it with a load (resistor or solenoid) for some of the fuel stuff (air split, relief, etc).
Has anybody run into this behavior?

J

btw, I can't wait for a better EMS to arrive.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
stickmantijuana
3rd Generation Specific (1993-2002)
5
01-11-16 04:08 PM



Quick Reply: G-Force w/ Single turbo set-up- weird ECU behavior



All times are GMT -5. The time now is 11:25 AM.