3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Funny noise coming from turbo

Thread Tools
 
Search this Thread
 
Old Aug 30, 2006 | 01:03 PM
  #1  
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Oct 2002
Posts: 137
Likes: 0
From: C.T.
Funny noise coming from turbo

I have a problem the boost out of my stock twins and i wanted to see if you could help me. The boost on the first turbo is fine and hold nice at 10psi but after 4.5k when the second turbo comes on the boost will go down to about 5psi and by redline there is no boost at all. and if i boost it past 4.5k and let off the turbo will make a lound funny noise. My mods are cat-back and intank.

Thanks Mark T
Reply
Old Aug 30, 2006 | 01:13 PM
  #2  
DMoneyRX-7's Avatar
Derek
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Sep 2005
Posts: 2,011
Likes: 4
From: Treasure Coast, FL
start checking vauum hoses. that loud noise is probably your stock BOV
Reply
Old Aug 30, 2006 | 01:26 PM
  #3  
MavrickFD's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 198
Likes: 0
From: Bay Area / CoCo County
Be sure to look at your check valves and make sure they're not busted. My FD was is doing the exact same thing. Looked at a hose diagram and found out that the check valve between the Y-pipe and the pressure chamber was completely busted. As soon as I get my check valves and install it, I'll let you know if it fixed my problem
Reply
Old Aug 30, 2006 | 01:47 PM
  #4  
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Oct 2002
Posts: 137
Likes: 0
From: C.T.
Originally Posted by DMoneyRX-7
start checking vauum hoses. that loud noise is probably your stock BOV
You think my stock bov is broke? bc it does't sound like the stock bov. I had my car for over 4 years now and this is my first boost problem

Last edited by mark1rx7; Aug 30, 2006 at 01:50 PM.
Reply
Old Aug 30, 2006 | 01:49 PM
  #5  
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Oct 2002
Posts: 137
Likes: 0
From: C.T.
I don't know where the check valves is but im going to find it
Reply
Old Aug 30, 2006 | 01:52 PM
  #6  
Montego's Avatar
Don't worry be happy...
Tenured Member: 20 Years
Loved
Community Favorite
Top Answer: 1
iTrader: (1)
 
Joined: Apr 2001
Posts: 6,901
Likes: 842
From: San Diego, CA
Check the big hoses first... if no luck:

there is a sticky here with the whole sequential system. I has all of the vacuum hoses, solenoids, valves, everything. Use that in combination with the worshop manual (it is also a sticky) and start trouble shooting. I think that you most likely find a cracked hose or something.
Reply
Old Aug 30, 2006 | 04:30 PM
  #7  
mad_7tist's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 1,899
Likes: 0
From: tampa
the crv is not closing when the ccv opens after 4500. all the boost is prob going out the crv. check the hose going to it.
Reply
Old Aug 31, 2006 | 08:50 AM
  #8  
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Oct 2002
Posts: 137
Likes: 0
From: C.T.
Originally Posted by mad_7tist
the crv is not closing when the ccv opens after 4500. all the boost is prob going out the crv. check the hose going to it.
The noise is only made after i let off the gas.
Reply
Old Aug 31, 2006 | 12:12 PM
  #9  
CantGoStraight's Avatar
What's your point ?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 3,573
Likes: 0
From: Gainesville, Fla.
If it was your factory BOV you would'nt have primary boost either. Like said above check your CRV to make sure it' closing or even the hose from the y-pipe to the CRV. You'll most likely find the hose from the y-pipe to CRV split.
Reply
Old Sep 2, 2006 | 07:02 PM
  #10  
Thread Starter
Full Member
Tenured Member 20 Years
 
Joined: Oct 2002
Posts: 137
Likes: 0
From: C.T.
The hose is cracked. Wheres is best place to buy one..dealer?
Reply
Old Sep 2, 2006 | 07:10 PM
  #11  
CantGoStraight's Avatar
What's your point ?
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 3,573
Likes: 0
From: Gainesville, Fla.
You can go to any automotive store and get them to find a preshapped one of same size and aproximate shape for less.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cristoDathird
Introduce yourself
28
May 30, 2019 08:47 PM




All times are GMT -5. The time now is 06:48 PM.