Fuel line capacity for fuel system...
11-24-12, 02:09 PM
#1
Fuel line capacity for fuel system...
Hey guys
i need some advice from you
i'm currently finishing off my fuel system and want to know what size fuel feed hose i should run from the fuel tank
my fuel system is currently:
-Walbro 400LPH pump
-Primaries: ID850s
-Secondaries: Five-O Injectors 2200cc "Silver Bullets" (Basically a set of flow matched ID2200's)
-Full Function Engineering Primary and Secondary rails
I'm looking to make 500 hp
Will a -8 AN hose from the pump be enough to feed that system?
or should it be a -10 AN hose?
also if i'm running a -8 AN hose or a -10 AN hose from the pump, will a -6 AN hose be enough for a fuel return line? or do i need to increase the size of that as well?
you help is appreciated guys!
Thanks!!
i need some advice from you
i'm currently finishing off my fuel system and want to know what size fuel feed hose i should run from the fuel tank
my fuel system is currently:
-Walbro 400LPH pump
-Primaries: ID850s
-Secondaries: Five-O Injectors 2200cc "Silver Bullets" (Basically a set of flow matched ID2200's)
-Full Function Engineering Primary and Secondary rails
I'm looking to make 500 hp
Will a -8 AN hose from the pump be enough to feed that system?
or should it be a -10 AN hose?
also if i'm running a -8 AN hose or a -10 AN hose from the pump, will a -6 AN hose be enough for a fuel return line? or do i need to increase the size of that as well?
you help is appreciated guys!
Thanks!!
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
Megasquirt timing map and EGt ?? what do you guys think
immanuel__7
Megasquirt Forum
3
08-22-15 09:34 PM
