Rdodds033

iTrader: (9)

hey guys, my FD has been flooding alot lately so for a temporary fix i want to install a fuel cut switch.

so... where do i need to run all the wires for it?? pictures would be great too

FD3S2005

iTrader: (11)

I Dont understand how people flood cars , iv never had my car flood. Also what do you mean by a fuel cut switch? For driving the car or when it's off? Fuel cut when driving is very bad. Starving the engine of fuel will cause you to go out and buy a new motor

Rdodds033

iTrader: (9)

i mean when its off... you turn it off to deflood it, then turn it back on to start it.

proz07

iTrader: (6)

its already installed hold the pedal to the floor then crank itll shut off fuel for clearing.

z

theorie

iTrader: (31)

^ +1 yeah you can do that, or pull the relay from under the hood.

Rdodds033

iTrader: (9)

well i got it running again after my 4th attempt at deflooding it, this time i cleaned all of the plugs and it fired

does holding the peddle down work with the PFC? because i have never gotten that to work

TpCpLaYa

iTrader: (10)

in theory...when the ECU see's WOT (4.5+V) it disables the injectors however when my car has flooded I have had hit or miss with this working. Usually I just pull the relay. One thing you want to make sure is that your TPS is properly and adjusted within range otherwise a WOT may not actually register as WOT.


just my thoughts