3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

fresh rebuilt engine making clunking noise

Thread Tools
 
Search this Thread
 
Old 06-17-07, 11:23 AM
  #26  
Running Lean

iTrader: (1)
 
fitzrx7's Avatar
 
Join Date: Aug 2002
Location: Hometown of Deland FL
Posts: 415
Likes: 0
Received 0 Likes on 0 Posts
From my understanding the stock knock sensor will only cause up to a maximum 6 degree retard in timing if it is faulty or knocks. If you unplug it it WILL cause a 6 degree timing retard and a check engine light. Besides if it is bad you will get fault code 5 when you pull the codes. So don't bother with the supra tactics.

Trev, your homework assignments is the READ THE FSM and stop posting bad info.

On a related note I just rebuilt my motor and noticed a nasty sound on startup coming from the front of the engine. Then I realized that my PS pump wasn't topped off all the way, filled it up and the nose stopped.
Old 07-24-07, 11:42 PM
  #27  
PARTS GALORE!

iTrader: (4)
 
RX-7 From Heaven's Avatar
 
Join Date: Aug 2005
Location: Glendale, CA
Posts: 1,064
Likes: 0
Received 0 Likes on 0 Posts
i just wanted to update on the people that were helping us out with the problem that the noise stopped coming around 20 miles. we're guessing something was just breaking in like the new chain or something. alvaro said the car's nice and strong and starts with the first try and everything seems to be okay, even though vacuum is still a bit weak, but i guess that's normal with a brand new rebuilt. again, thanks for all the help guys, and good luck with your fd's....
-erik
Old 07-25-07, 12:22 AM
  #28  
TANSTAFL

iTrader: (13)
 
alexdimen's Avatar
 
Join Date: Oct 2003
Location: Richmond, Va.
Posts: 3,770
Received 123 Likes on 82 Posts
Strange... I bet you'll find out it was something getting whacked when you do some other work.
Old 07-25-07, 01:18 AM
  #29  
PARTS GALORE!

iTrader: (4)
 
RX-7 From Heaven's Avatar
 
Join Date: Aug 2005
Location: Glendale, CA
Posts: 1,064
Likes: 0
Received 0 Likes on 0 Posts
we opened up the front cover twice and didn't see anything messed up or wrong or scratched or anything. i had checked everything when building the motor thoroughly, and everything was up to spec and better. compression test numbers were pretty good too for a brand new rebuild, so the engine was getting compression. i guess we'll see if something does go wrong, but i doubt it since everything seems perfect right now....
-erik
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
autoxer
3rd Generation Specific (1993-2002)
21
05-22-19 04:07 PM
Michael Mansour
New Member RX-7 Technical
7
08-18-15 03:13 AM



Quick Reply: fresh rebuilt engine making clunking noise



All times are GMT -5. The time now is 02:32 PM.