fresh rebuild... idling at 1250 before stalling out... -50 boost
01-07-06, 07:35 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: New Zealand
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
fresh rebuild... idling at 1250 before stalling out... -50 boost
so, gigure there has to be a vacuum leak.
2 possible culprits... the EGR line from the front of the front intake elbow is not connected (but shouldn't affect vaccum right?!)
OR; i have one small nozzle not conencted by the look of it... first nipple on the elbow coming up from the rear turbo... sitting WIIIIIDE open... missed it, no idea where it goes even from the diagrams!
2 possible culprits... the EGR line from the front of the front intake elbow is not connected (but shouldn't affect vaccum right?!)
OR; i have one small nozzle not conencted by the look of it... first nipple on the elbow coming up from the rear turbo... sitting WIIIIIDE open... missed it, no idea where it goes even from the diagrams!
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
03-11-19 05:34 PM