WVSRMOTORSPORTSRX7

Ok clearanced the turbo by way-laying the crap out of the framerail....have about an inch clearance from the turbo and the framerail now... I had to beat on the passenger side framerail from the front gusset to the rear gusset and even broke the weld on the rear gusset....

NOW the question is:

"How will my car be affected?"

Will my mod job affect the intergrity of my car or will it not be affected?

Should I have braces welded in?

Thanks guys:

blackscorpio

It may just be me, but shouldnt you have asked this BEFORE bending up the frame.

turbojeff

iTrader: (30)

NO it won't hurt it at all. In fact why don't you just cut the frame rail off. That'll give you the clearance you need.

Think first, then ask.

Jeff
Do it right, do it ONCE.

blackscorpio

Hey I just took the motor out of my car to save weight, You think ill need it ??

Air-Rex

I figured you were a teenager, You should know better than that! Maybee take it to a frame shop, they could make it stonger than before. It could be boxed in that spot, broken weld repaired, gussets added. Just kidding about the first remark.(sort of)