RotorMotor

iTrader: (5)

so im gonna be going FMIC with the greddy 3 row, and wanted some info on mounting etc. First of all the IC should sit right up flush againsed the back of the bumper right??

doesnt this displace the radiator and AC stuff? do you have to go verticle with your radiator and AC?

also, if this needs to be done, how will this affect cooling since the FD was designed for the crazy tilted readiator? i will also be using a KOYO radiator. If anyone has pictures of their setup, or even better pictures of the instalation pleeeease post!!!! thanks guys!!!!

evot23

iTrader: (17)

With the 3 row you may have to trim the bumper to fit as the IC will hit it. Have not seen a three row on a STOCK bumper that fits without some mods.

It will displace the radiator and the a/c, you'll have to stand them.

Cooling is always an issue, especially since now you have this thick core in front of your radiator. The Koyo is good, you may need to run your fans a bit.

RotorMotor

iTrader: (5)

i will actually be going with the 99+ bumper for extra airflow (someone did a writeup with a FMIC on that bumper...but it wasnt a 3 row i dont thnk). with the 3 row, wider koyo standing, and ac standing how much room am i going to have? (i need all the extra room i can get for an extra rotor .