Fluidyne install w/PFS SMIC
05-28-02, 08:27 AM
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: Garden City, New York, USA
Posts: 286
Likes: 0
Received 1 Like
on
1 Post
Fluidyne install w/PFS SMIC
I seem to recall a question regarding the use of a Peter Farrel stock mount intercooler with an aftermarket radiator. For the record, I just installed a Fluidyne with my PFS intercooler, and the IC duct just fits with the inrceased thickness of the Fluidyne. It's tight, but it does work. For those considering a Koyo rad (which is thicker thant the Fluidyne), I'm certain the duct will not fit.
Also, if you buy a Fluidyne, make sure you remove the drain plug and apply teflon tape to the threads and reinstall. I put it all together, only to have it leak, and it turned out to be from the drain threads.
Also, if you buy a Fluidyne, make sure you remove the drain plug and apply teflon tape to the threads and reinstall. I put it all together, only to have it leak, and it turned out to be from the drain threads.
05-28-02, 01:42 PM
#3
I just installed my PFS IC duct with Fluidyne rad.. I also notice the same thing as "gcthree".. It fits fine.. But the radiator is also leaking.. i tried to tighten the thread.. but still leaking.. I have to empty and put teflon tape.. Thanks!!
Far as Koyo.. I just can't seem to see how the duct is going to fit... Raysane, can you post a pic for us?? and how you fitted??
PHIL
Far as Koyo.. I just can't seem to see how the duct is going to fit... Raysane, can you post a pic for us?? and how you fitted??
PHIL
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM