Fluid tank / resovoir in rear bins?
#1
FDrx7.com
Thread Starter
Join Date: Oct 2004
Location: Sydney Australia
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Fluid tank / resovoir in rear bins?
I am needing to install a 10-15 litre resovoir for water injection in my FD.
Having looked all over the car (Literally) for a space to install it, where it won't stand out visually (I am doing a stealth install...with a T51R ) and where I can also fill the tank easily, I have decided to place it into the rear bin space (Rear seat area)
Has anyone done this before? I am wanting to keep the lids of the bins, however cut the base out and install a SS tank in there (Similar to the battery relocation excercise)
Does anyone have a template for such a tank?
Thanks for any help in advance
Having looked all over the car (Literally) for a space to install it, where it won't stand out visually (I am doing a stealth install...with a T51R ) and where I can also fill the tank easily, I have decided to place it into the rear bin space (Rear seat area)
Has anyone done this before? I am wanting to keep the lids of the bins, however cut the base out and install a SS tank in there (Similar to the battery relocation excercise)
Does anyone have a template for such a tank?
Thanks for any help in advance
#2
RX-7 Bad Ass
iTrader: (55)
You could also get a rear washer tank from a car with a rear wiper - VERY clean install, has a nice filler cap, etc. Fits in the back of the hatch, kind of around the hatch latch.
Dale
Dale
#3
FDrx7.com
Thread Starter
Join Date: Oct 2004
Location: Sydney Australia
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
I have to presurise the tank, and need 10-15 litres minimum (30%+ water being injected at higher boost levels..)..The little plastic tank unfortunately won't do it for me.
It would have been a simple solution otherwise.