3 Years worth of work and upgrades include:

Triple-R Urethane Motor mount fabrication (w/steel bracket arms)
REMedy High flow WP install
Some Chrome: Alt bracket, idler pulley, CAS bracket, engine lift bracket
MazdaSpeed oil filler cap rejuvination
Custom Billet 1.5qrt catch can fabrication and install
Stance GR+3 Dampers install
Hiem joint rear sway bar ends install
MazdaSpeed Rear Strut Bar install
BBK Spare tire wheel spacer
18x10 CCW track wheels
Spirit-R Seats w/tilt and slide rails refurbishment
Feed Seat Bolster covers
Simpson 6 Point Harnesses
SBG Passenger side foot rest
SBG Aluminum Inner Passenger Door handle
FEED weighted shift ****
Revolution Carbon Fiber door sills
MazdaSpeed white faced instrument cluster
RE-Amemiya White faced boost gauge and gauge pod
MazdaSpeed SS license plate frame
Vented Rear Bumper corner light vents fabrication and install
Stock twin turbo rebuild

All pages can be accessed from: 7-UP CLUB HOME PAGE
Some Holiday Reading for you. Enjoy

Here's wishing my fellow rotorheads a happy holiday and stockings filled with all things automotive.
Crispy

PS: any issues let me know. It's a lot and I'm sure to have missed something.

 

First time ive seen your website, great stuff thanks for sharing.

 

some of the links are no longer active in the rx7 links page

 

LOL. Yeah that's not surprising. One of the first pages I wrote... I haven't touched that one since 2001! I'll take a look and maybe revise.
Regards,
Crispy

 

Nice site, inspiring me to finish all my stuff.

 

Yes! Thank you! I had a pleasant evening reading through you updates, such good stuff!


You need to bring her down to dgrr in 2013! I'd love to see it in person, there might be a beer in it for ya

Dale

 

Crispy your refurb work is second to none, good stuff for sure and merry christmas!

PS Time to put all those parts to use at one of the 3 day porsche events at VIR

 

I might just do that!

Thanks for the feedback. It's much appreciated. Perhaps I'll get princess back on the track. I have a set of Hoosiers with only one weekend on them that I need to use before they dry rot! LOL

Regards,
Crispy

 

Crispy-poo...... I searched your website high and low, and couldn't find the link to order Triple-R stickers

Get on your horse sucka !

 

Thanks for the updates Crispy. Good reading material.

How do you use the spare now with that wheel spacer? It looks like the spare wheel is attached to the spacer...

 

It's mounted to the spare just for storage in the trunk space. To actually use it you would have to unbolt the spacer, bolt it to the hub and then bolt up the spare. But at least there is no fear of getting stranded and having to call a flatbed. :-)

Regards,
Crispy

 

Did you ever look into whether the RX8 or Mazdaspeed3 spare would work? I understand it is a 17" donut.

 

I did not. However there are two things to consider that include not only the diameter but also the backspacing to clear the caliper. Those 17's might be large enough but if they are like most donuts for cars with "smaller" single pot calipers they are pretty shallow. Don't forget that the JDM FD's equipped with 17's would also have had a bigger donut but one would have to see if it also would clear a BBK.

Test them and report back.

Regards,
Crispy

 

This was one of the first few sites I set my eyes on for RX7's before buying one.

BTW, nice "Spirit R" seats.... mom-edition.

 

Crispy, just to add another ' ' for your site. I go back to your's and a couple others every so often. I don't have your budget, but I always learn something, a little tid-bit, an idea....something. A bar set high makes everyone reach a little higher.

 

Looking good Chris. Hopefully, we'll catch up track side this year.