TpCpLaYa

iTrader: (10)

i have a couple of questions that were kinda hard to search in terms of but:

BTW, I have an auto with a streetported motor that has about 3k on the new motor.

1. When i shift into reverse the whole cars jerks for the sec its shifting into reverse......anyone know why or is that sumwhat normal. There arent any big jerks like that when shifting into other gears.

2. When i start up the car it goes into the AWS which is around 3k but after its done its thing for like 15 secs it drops suddenly to around 2.3k and sort of studders and seems liek it wants to die. It only studders for a second but it just doesnt seem like its a good thing for the car.

dpasseto

You might already know this but the AWS is not really good for the motor. Don't let it run for 15 seconds. I tap my accelerator as soon as I turn my car on to bring it down to 1000rpm.

adamrx7

befor I had block off plates I use to turn my car on then as soon as it started I'd switch it off then back on again with out letting the car die. It turns your AWS off automaticaly. It bacame such a habbit i did it after the block off plate. Try it and thank me later

ejmack1

theres a new way to get by it never heard that one before...

adamrx7

I didnt know that it was a new way, I learned it 3 years ago when Pettit Racing came to St.Louis.

Awww memories.