FD3S Stock Turbo BOV?
#1
JAPAN!!!!
Thread Starter
Join Date: Jun 2009
Location: Yokosuka Japan
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
FD3S Stock Turbo BOV?
I am wanting to cap off the stock BOV nipple so I can reroute everything through my IC mounted BOV but I don't know the best way to go about capping that off. Any suggestions?
#2
rotorhead
iTrader: (3)
depending on your setup, you can plug unneeded holes with rubber plugs from the hardware store (rubber corks is what they call them). Since you are in Japan I have no idea what is available from hardware stores there.
What intake do you have? You may have to plug a hole for the stock BOV recirculation on there.
What intake do you have? You may have to plug a hole for the stock BOV recirculation on there.
#3
JAPAN!!!!
Thread Starter
Join Date: Jun 2009
Location: Yokosuka Japan
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I have an aftermarket intake. I don't see a recirculation line on there. I will probably just take your advice and put a rubber plug in the BOV nipple and reroute everything through my IC mounted BOV.