fd3 running very rich, any ideas?
fd3 running very rich, any ideas?
hi i have a gen 3 twin turbo with a hks exhaust, induction kit and and a superchip.
The car has just gone in for an MOT and has failed on emissions. It seems the car is running very rich and does have a strong smell of petrol when ticking over. Does anyone have and suggestions before i take it it for the retest, cheers
The readings are as below.
co=7.47%
HC=2069ppm
The car has just gone in for an MOT and has failed on emissions. It seems the car is running very rich and does have a strong smell of petrol when ticking over. Does anyone have and suggestions before i take it it for the retest, cheers
The readings are as below.
co=7.47%
HC=2069ppm
Rotary Enthusiast
Joined: Feb 2004
Posts: 1,083
Likes: 4
From: california
check the ECU if it has a superchip in it call them and ask if they changed the fuel maps on the low end . you should be at stock fuel maps from 0-25 mph which is how the car is tested. and make sure the smog tech dose not boost the car when its under the test you will fail.
Jeff
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
Mar 11, 2019 05:34 PM
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
jetlude
Single Turbo RX-7's
4
Aug 18, 2015 04:53 PM






