FD throttle adapter
#3
Rotary Enthusiast
Thread Starter
iTrader: (9)
Join Date: Jun 2003
Location: west
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by KINETIK_FD3S
hks also makes one with ports for 2 injectors but looks like the stock elbow, why do you need a cone type?
I guess it has to be custom made. I don't want to cut the Greddy piece
#5
Rotary Enthusiast
You can cut your original and fit pieces to run where you want. Bevel the edges of your cuts, fill with fiberglass mat and resin to join, and bingo, custom elbow. I did it and it works great. No problems with seperation running 15PSI. Sand and polish the seams when you are through and you can't tell it from a Pro part.
#6
Custom or Nothing
iTrader: (2)
Originally Posted by impactwrench
You can cut your original and fit pieces to run where you want. Bevel the edges of your cuts, fill with fiberglass mat and resin to join, and bingo, custom elbow. I did it and it works great. No problems with seperation running 15PSI. Sand and polish the seams when you are through and you can't tell it from a Pro part.
Thread
Thread Starter
Forum
Replies
Last Post