negative

Do you know where I can get new lining seals? I just heard that they are expensive.

Thanks

Mahjik

iTrader: (1)

Malloy Mazda (Virginia)
1-888-533-3400
Talk to Ray Crowe

donny

if you are talking about the molding around the glass on the outside you may have to remove and re-install the glass to get it to sit around the glass properly. I install glass for a living and had to do this with mine. Most of the time the glue will ooze out and dry to the molding which makes it very difficult to re-set a new molding unless the glue is wet. Good luck..

damian

iTrader: (2)

if it is the seal between the hatch and body that is making noise, you can adjust the latch catch on the car to be further down thus creating more pressure on teh hatch seal