Fd Oem part #'s
Thread Starter
Full Member
Joined: Apr 2010
Posts: 74
Likes: 0
From: RI
Fd Oem part #'s
It would be great if this would be a sticky.
I have in the past spend hours on line searching for a part and even stopped by my local Mazda dealer.I even called other dealer in other states in hopes some one would have a answer for me.Half the time I gotten representatives that had no I idea what I was looking for.The other part of them didn't even want to bother spending there time looking up a part.I got answers like "it's not available, it's discontinued,or you have to buy the whole Assembly".When that wasn't true.I didn't give up and eventually found what I was looking for thanks to the very few that did their job and searched deeper to help find what I needed.
I want to start a parts list to save time and the hassle.I'll start by posting a few part #s I have.I had a list of over 30 parts #'s from parts I had ordered in the past unfortunately I lost it.That's 1 of the reason I decide to post them here.
Every one who knows some please post them no matter what they are.
Exhaust manifold nuts to block
9YB1-01-001
Oil pan drain gasket
9956-41-400
Studs for lower intake manifold 4 required same part# for the upper intake manifold to throttlebody 3 required
9985-10-82OA
Upper intake manifold to throttle body long stud 1 required
9985-10-830A
idler pulley for power steering tension bolt
N3A1-15-966
Washer fluid spray nozzle for the hood
FD01-67-510-03
I have in the past spend hours on line searching for a part and even stopped by my local Mazda dealer.I even called other dealer in other states in hopes some one would have a answer for me.Half the time I gotten representatives that had no I idea what I was looking for.The other part of them didn't even want to bother spending there time looking up a part.I got answers like "it's not available, it's discontinued,or you have to buy the whole Assembly".When that wasn't true.I didn't give up and eventually found what I was looking for thanks to the very few that did their job and searched deeper to help find what I needed.
I want to start a parts list to save time and the hassle.I'll start by posting a few part #s I have.I had a list of over 30 parts #'s from parts I had ordered in the past unfortunately I lost it.That's 1 of the reason I decide to post them here.
Every one who knows some please post them no matter what they are.
Exhaust manifold nuts to block
9YB1-01-001
Oil pan drain gasket
9956-41-400
Studs for lower intake manifold 4 required same part# for the upper intake manifold to throttlebody 3 required
9985-10-82OA
Upper intake manifold to throttle body long stud 1 required
9985-10-830A
idler pulley for power steering tension bolt
N3A1-15-966
Washer fluid spray nozzle for the hood
FD01-67-510-03
Not trying to be a dick but all you had to do was call Ray Crowe:
https://www.rx7club.com/3rd-generati...mazda-1033616/
He could have given you all the Part #'s you need and if they were still available he would have given you a great price too.
https://www.rx7club.com/3rd-generati...mazda-1033616/
He could have given you all the Part #'s you need and if they were still available he would have given you a great price too.
Joined: Mar 2001
Posts: 31,837
Likes: 3,234
From: https://www2.mazda.com/en/100th/
that is the right side one, and i think in black. there were a few colors that came with matching nozzles, like red, and yellow.
you'll find that some parts defy listing as, like the washer nozzle, there are several different ones
and C, the parts catalogs are online, Foxed.ca - Mazda RX-7 Manuals
you'll find that some parts defy listing as, like the washer nozzle, there are several different ones
and C, the parts catalogs are online, Foxed.ca - Mazda RX-7 Manuals
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Not everyone knows about Ray Crowe and the last time I checked he didn't have a Car Forum.
Posting Info on this Forum is what this is all about,so Thanks Latin for the Info.
Posting Info on this Forum is what this is all about,so Thanks Latin for the Info.
